Intended use of the electric machine
This electric machine is intended to be used as a motor or generator and as a part of a machinery,
for example in:
Power train of a marine vessel, transportation vehicle or a heavy duty work machine.
Power generation equipment.
The electric machine is intended to be powered and controlled with an inverter or inverters
capable of supplying three-phase alternating current and that is capable of controlling the
electric machine. The electric machine is not suitable for direct online use.
The electric machine is solely intended for professional use, and may be operated only by trained
professionals. The maintenance of the electric machine may be done only by trained professionals.
Forbidden use of the electric machine
It is forbidden to use, handle and maintain the machine in following ways (including but not
limited to):
Using the electric machine for other purposes than de ned in this manual.
Disregarding the obligation to comply with the manual, safety signs and rating plate of the
electric machine.
Using the electric machine, making adjustments and maintenance without rst reading
this manual.
Exceeding the designed limits during the electric machine operation.
Using non-original service parts of wrong material causing corrosion problems and mechanical
failures in time.
Operating and performing maintenance for the electric machine without appropriate personal
protective equipment.
Using electric machine parts like frame, shaft end or terminal box for climbing or for support
for other structures.
Causing any kind of impact forces to the electric machine (for example hitting or hammering
or dropping objects).
Operating the electric machine with electric connections other than de ned in the manual
and/or other documents.
Operating the electric machine with insufficiently tightened connections or cable glands.
Operating the electric machine with power cables routed against the instructions.
Operating the electric machine without properly dimensioned and operating cooling system.
Operating the electric machine without following the bearing lubrication instructions.
Touching the connection terminal of the electric machine or doing maintenance or adjustment
operations on the electric machine with the electricity connected.
Accessing the connection box(es) if the shaft can be turned by an external prime mover.
Lifting the electric machine from wrong lifting points and without correct lifting equipment.
Lifting additional load with the machine.
Storing the electric machine outdoors in wet or dusty conditions.
Storing the electric machine without correct support to prevent rolling or falling of the
machines.
Using the electric machine in potentially explosive environment.
Allowing dirt or liquid to enter into the electric machine or connection box.
Using cables that cannot withstand the maximum currents of the electric machine.
EM-PMI240
3. Product overview
| BC355256345493en-000103
©
Danfoss | Produced By: Danfoss Power Solutions | September 2020 | 11
Summary of Contents for EM-PMI240
Page 1: ...User Guide Motor Generator EM PMI240 danfoss com...
Page 59: ......
