background image

The Danfoss Warranty:

You have purchased a Danfoss EFET 13x 
thermostat, which forms an integrated part of 
a Danfoss system, which we are certain will 
improve your home comfort and economy. 
Danfoss provides complete heating 
solu tions with Flex heating cables or Mat 
heating mats, Danfoss EFET 13x and Fast 
fi tting bands. 
If, however, contrary to all expectations, a 
problem should occur with your heating 
system, we at Danfoss, with manufacturing 
units in Denmark, are, as European Union 
suppliers, subject to general product liabi-
lity rules, as stated in Directive 85/374/CEE, 
and all relevant national laws which implies 
that:
Danfoss provides a warranty for Flex heating 
cables and Mat heating mats for a 10 year 
period and all other Danfoss products for a 
2 year period against defects in material and 
production. 
The guarantee is granted on the condition 
that the WARRANTY CERTIFICATE on the 
overleaf is fi lled out properly in accordance 
to instructions and that the defect is in-
spected by, or presented to, Danfoss or  
authorised Danfoss distributor. 
Please note that the wording of the 
WARRANTY CERTIFICATE must be 
provided in English or local language with 
the ISO code for your country in the upper 
left corner of the front page of the 

installation instructions in order to release 
the warranty.
The obligation of Danfoss will be to repair 
or supply a new unit, free of charge to the 
customer, without secondary charges 
linked to repairing the unit. 
In case of defective Danfoss EFET 13x, 
Danfoss reserves the right to repair the unit 
free of charge and without unreasonable 
delay to the customer. 
The Danfoss warranty does not cover 
installations made by unauthorised 
electricians, or faults caused by incorrect 
designs supplied by others, misuse, 
damage caused by others, or incorrect 
installation or any subsequent damage that 
may occur. If Danfoss is required to inspect 
or repair any defects caused by any of the 
above, then all work will be fully 
chargeable. 
The Danfoss warranty is void, if payment of 
the equipment is in default. 
At all times, we at Danfoss will respond 
honestly, effi ciently and promptly to all 
queries and reasonable requests from our 
customers. 
The above mentioned warranty concerns 
product liability whereas matters in 
relation to legislation on sale of goods shall 
be referred to national law.

Summary of Contents for EFET 130













Reviews: