Danfoss ECtemp Touch
5
Installation Guide
IP class
21
Protection class
Class II -
Dimensions
85 x 85 x 20-24 mm
(in-wall depth: 22 mm)
Weight
103 g
Electrical safety and Electro-Magnetic Compatibility for
this product is covered by the compliance with the EN/IEC
Standard “Automatic electrical controls for household and
similar use”:
• EN/IEC 60730-1 (general)
• EN/IEC 60730-2-9 (thermostat)
1�2
Safety Instructions
Make sure the mains supply to the thermostat is turned off
before installation.
Important:
When the thermostat is used to control a floor
heating element in connection with a wooden floor or
similar material, always use a floor sensor and never set the
maximum floor temperature to more than 35°C.
Please also note the following:
• The installation of the thermostat must be done by an
authorized and qualified installer according to local
regulations.