ECtemp 330 (-10 to +10°C)
5
Installation Guide
Protection class
Class II -
Dimensions
86 x 36 x 58mm
Weight
83g
The product complies with the EN/IEC Standard “Automatic
electrical controls for household and similar use”:
•
EN/IEC 60730-1 (general)
•
EN/IEC 60730-2-9 (thermostat)
1.2
Safety Instructions
Make sure the mains supply to the thermostat is turned off
before installation.
Please also note the following:
•
The installation of the thermostat must be done by an
authorized and qualified installer according to local
regulations.
•
The thermostat must be connected to a power supply
via an all-pole disconnection switch.
•
The sensor is to be considered as live voltage. Have
this in mind if the sensor must be extended.
•
Always connect the thermostat to continuous power
supply.
•
Do not expose the thermostat to moisture, water,
dust, and excessive heat.
