Danfoss ECtemp 130, Installation Manual

Page: 3 / 20

ECtemp 130
3 Installation Guide
1 Introduction
ECtemp 130 is an electronic thermostat to be installed di-
rectly on the wall. It is provided with a floor sensor to measure
and control the desired floor temperature.
The thermostat has a button for adjusting the temperature
setting with a scale from ( ) 1 to 5 (each step corresponds to
approximately 9°C). Furthermore, the thermostat has an LED
indicator showing standby periods (green light) and heating
periods (red light).
More information on this product can also be found at:
ectemp.danfoss.com
Table of Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . 3
1.1 Technical Specifications . . . . . . . . . . . . 4
1.2 Safety Instructions . . . . . . . . . . . . . . . 5
2 Mounting Instructions . . . . . . . . . . . . . . . . . 6
3 Settings . . . . . . . . . . . . . . . . . . . . . . . . . 10
3.1 Temperature Settings. . . . . . . . . . . . . 10
4 Warranty. . . . . . . . . . . . . . . . . . . . . . . . . 14
5 Disposal Instruction . . . . . . . . . . . . . . . . . 16