Danfoss ECL Comfort L76, User Manual

Page: 39 / 41

The yellow
side of the
ECL Card The yellow
side of the
ECL Card
Choose your favorite
display (circuit II)
1b
Choose the display - A, B, or C - for daily
operations.
Room temperature - display A
Line
Circuit
Outdoor
temp.
(S1)
Room temp. (ECA 60 / 61 or
ECA 62 / 63)
0 2 3
20
-
A
Desired room temp.
The display will only show a value if an ECA 60 / 61 or
ECA 62 / 63 is connected. If not, two bars will be shown.
System information - display B
Line
Circuit
Flow
temp.
(S4)
State of controlled units
1 2
ON
B
1
ON
3
ON
5 0 3 6
2
Return temp.
(S6)
Push and hold the shift button to see:
- the calculated flow temperature
- the desired return temperature limitation.
Today’s schedule - display C
Line
Circuit
Outdoor
temp.
Time
8
0 3 6 9 12 15 18 21 24
1
0 2 3
5
-
C
3
Today's schedule
Desired room
temp.
The controller automatically reverts to display C if the card has
been reinserted or the power supply has been interrupted.
If the temperature value is displayed as "- -", the sensor in
question is not connected. "- - -" means that the sensor is short-
circuited.
1a
Choose your favorite display
(circuit I)
Choose the display - A, B, or C - for daily
operations.
Room temperature - display A
Line
Circuit
Outdoor
temp.
Room temp. (ECA 60 / 61 or
ECA 62 / 63)
9 1 3
20
A
Desired room temp.
The display will show the room temperature if a room panel or a
remote control is installed. If not, two bars will be shown.
System information - display B
Line
Circuit
Flow temp.
State of controlled units
5
1
1
ON
2
0 3 6
B
3
ON
2
ON
Return temp.
Push and hold the shift button to see:
- the calculated flow temperature
- the desired return temperature limitation.
Today's schedule - display C
Line
Circuit
Outdoor
temp.
Time
8
0 3 6 9 12 15 18 21 24
1
0 2 3
5
C
3
Today's schedule
Desired room
temp.
The controller automatically reverts to display C if the card has
been reinserted or the power supply has been interrupted.
If the temperature value is displayed as "- -", the sensor in
question is not connected. "- - - " means that the sensor is short-
circuited.