MENU > Settings > Boiler
Low X
1x607
Definition of which voltage value corresponds to which position value.
The voltage (as a 0 - 10 volt signal) comes from a position measuring in
M1 and is applied to input S11 (ECA 32). This input voltage is converted to
display a % value for the position of M1.
See also "Position" and "High X".
See Appendix “Parameter ID overview”
X
= Volt
Y
= Position
# 1 # = Low X
MENU > Settings > Boiler
High X
1x608
Definition of which voltage value corresponds to which position value.
The voltage (as a 0 - 10 volt signal) comes from a position measuring in
M1 and is applied to input S11 (ECA 32). This input voltage is converted to
display a % value for the position of M1.
See also "Position" and "Low X".
See Appendix “Parameter ID overview”
X
= Volt
Y
= Position
# 1 # = High X
134 | © Danfoss | 2017.09
VI.GU.L2.02
Operating Guide ECL Comfort 210/296/310, application A275/A375
