2
2
2
1
CC-000013
1
2
M1, M2 Control circuit
Power supply
L
N S1 S2 M1 M2
L1 L2 L3
2
3
4
5
1
CC-0035
L1
L2
L3
1
2
3
4
5
Black
Blue
Brown
Phase sequence input
Internal control contact
Safety circuit
Thermistor connection
Module power
Figure 42: Wiring connections for DSF485 and DSF530 code 3
Motor protection module
The motor protection modules come preinstalled within the terminal box. Phase sequence protection connections
and thermistor connections are pre-wired and should not be removed.
The module must be connected to a power supply of the appropriate voltage. The module terminals are 6.3 mm
(0.25 inch) size Faston type.
Figure 43: Motor protection module
Electrical specifications
Motor voltage
Danfoss scroll compressors DSF are available in motor voltage listed below.
Table 18: Motor voltage
Frequency
Motor voltage code
Code 3
Code 4
Code 7
Code 9
50 Hz
Nominal voltage
-
380-415V-3ph
400V-3ph
(1)
-
-
60 Hz
Nominal voltage
208-230V-3ph
460V-3ph
575V-3ph
380-400V-3ph
(1)
DSH090-200
(1)
DSH090-200
NOTE:
Voltage range
: Nominal voltage ± 10%. The voltage range indicates where the compressor can run in the majority
of the application envelope. A boundary voltage supply which accumulates under specific conditions such as high
ambiance, high superheat, or map boundary conditions, may lead to a compressor trip.
© Danfoss | Climate Solutions | 2023.06
AB309735209512en-000603 | 35
Scroll compressors, DSF090 to DSF530 | Electrical connections
