Danfoss District Energy
DSA 1 MINI -
99
Danfoss District Energy
VM.HE.B2.02
DEN-SMT/PL
Commissioning
8.0 Commissioning
Danfoss District Energy DSA 1 MINI
The Danfos District Energy DSA 1 MINI Station is the link
between the district heating supplier and the district heat
recipient. All system parts must be checked and harmonized
with one another to meet the district heating supplier and
the district heat recipient’s requirements.
It is important that the all relevant technical guidelines of
the local district heating supplier is applied and followed
to ensure correct installation of the primary-side in the
building supply section. The work must only be performed
by skilled personnel.
It must also be ensured that an easy accessible installation
point is selected for the district heating transfer station.
The relevant technological rules and regulations, in
particular the applicable standards, or where these are not
provided the applicable EN standards, must be complied
with.
Dear Commissioning Engineers!
This Danfoss District Energy DSA 1 MINI station is checked in
the factory for leaks before delivery. Leaks are however
possible due to the vibration caused by transport. Therefore
it is impotent to retightening before commissioning!
There are no warranties given for seals and wear and
tear parts.
Connections re-tightened
date:
installer:
