Comfort adjustment, to change temperature
Comfort adjustment means moving the whole curve upwards or downwards.
Drag clockwise or anticlockwise to raise or lower the offset. Each point
represents an increase/decrease of approximately 1°C on the supply
line temperature.
Alternatively, press
or
NOTE: This option should be primarily used for temporary temperature adjustments. When permanently
changing the indoor temperature for a more precise indoor climate, change the heat curve settings.
5.2
Adjusting the Heat Curve
The Curve indicator has two modes that can be toggled by pressing the Curve indicator symbol.
1. Press
on the Start screen to open the Menu screen.
2. Press
3. Press
if the Heat curve is not shown.
4. There are two ways of adjusting the heat curve:
▪
If the Curve indicator
40
is lit, press or to adjust the
entire curve.
Or:
▪
If the Curve indicator
40
is not lit individual points can be
moved separately by pressing the desired individual point
and pressing and to the desired temperature.
5. Confirm the new selection by pressing
5.3
Heating Settings
In Heating settings, you can set seasonal stop and min/max supply line temperature.
1. Press
on the Start screen to open the Menu screen.
2. Press
3. Press
if the Heat settings window is not shown.
4. Make the desired changes.
5. Confirm settings by pressing
User Guide
DHP-M
VUMIB102
Danfoss Heating Solutions
12