DEVIreg™ 532
Installation Guide
5
Type
1C
Storage temperature
-20 to +65°C
IP class
31
Protection class
Class II -
Dimensions
85 x 85 x 36 mm
Weight
90 g
The product complies with the EN/IEC Standard «Automatic
electrical controls for household and similar use»:
• EN/IEC 60730-1 (general)
• EN/IEC 60730-2-9 (thermostat)
1.2
Safety Instructions
Make sure the mains supply to the thermostat is turned off
before installation.
IMPORTANT:
When the thermostat is used to control a
floor heating element in connection with a wooden floor or
similar material, always use a floor sensor and never set the
maximum floor temperature to more than 35°C.
Please also note the following:
•
The installation of the thermostat must be done by an
authorized and qualified installer according to local
regulations.
