Danfoss DEVI 140F1073, Installation Manual

Page: 3 / 12

DEVIreg™ 330 (+60 °C to +160 °C)
3 Installation Guide
1 Introduction
DEVIreg™ 330 is an electronic thermostat to be installed in
electric cabinets with DIN rail attachment. The thermostat
must be installed via an all-pole disconnection switch.
Either a wire sensor or an external air sensor must be used
to measure and control the desired temperature.
The thermostat has a button to adjust the temperature set-
ting, with a scale from +60 °C to +160 °C. An LED indicator
shows standby periods (green light) and heating periods
(red light).
More information on this product can also be found at:
devi.com
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1 Technical Specifications . . . . . . . . . . . . . . . . . . . . 4
1.2 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . 5
2 Mounting Instructions . . . . . . . . . . . . . . . . . . . . . . . . 6
3 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4 Disposal Instruction . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Table of Contents