![background image](http://html1.mh-extra.com/html/danfoss/cs10/cs10_technical-information_3415580013.webp)
CAN
The CAN section provides the possibility to setup a set of messages to be received.
The desired baudrate for the CAN unit needs to be set in the field Baudrate.
When the baudrate has changed this setting activates after the next power cycle or by using the
DeviceRestart button on the Overview page.
For each signal to be received the ID, Indicator for extended ID (Ext ID) and Mask must be applied. The
option Protect leaves the latest received message at the output of the corresponding CAN receiver.
Pressing the Save button sends the applied configuration to the device.
Using the Reset button applies a set of default parameters.
When a corresponding message has been received its parameter appears in the fields Received ID,
Length and Data. The LED indicates if the message has been received during the previous second.
Technical Information
PLUS+1® CS10 Wireless Gateway
Configuration
©
Danfoss | November 2020
BC356772124151en-000102 | 13