COMM-EL Ethernet Communications Kit for AKC 55
07/02.1
084R9813
RI.8C.P1.22
4
4. When you have finished modem configuration, the
screen will look like this:
5. Go on to the next section to configure alarm routing.
Configuration of the AKC 55, Alarm Routing:
1. Start at the Alarm Configuration Screen (from the
Main Menu, select Configuration, then Alarms). On
the Alarm Configuration screen, select Routing. This
is the screen that appears:
2. In the Alarm Routing screen, select IP Network and
press ENTER. The screen you see is for the first of
the two possible IP destinations. Fill in the Name
and IPAddress fields. The IP address, which you
can get from your IT department, is the address of
the network device that will receive alarm calls.
