background image

 D

 US

 F

 E

© Danfoss | Climate Solutions | 2023.07

AQ450440081306en-US0201 | 13

|

 Compressor assembly

Pipe connection

Pipe connection

4.7  Operating mode of the lockable service connections

Fig. 9

Opening the shut-off valve:

Spindle: turn to the left (counter-clockwise) as far as it will go. 
—> Shut-off valve completely opened / service connection closed.
The connection which cannot be shut off is intended for safety devices.

Fig. 10

Opening the service connection

Spindle: Turn ½ - 1 turn to the right clockwise. 
—> Service connection opened / shut-off valve opened.
The connection which cannot be shut off is intended for safety devices.

Service connection
closed

Connection
blocked

Spindle

Connection cannot 

 

be shut off

Connection cannot 

 

be shut off

Service connection 
opened

Spindle

Connection
open

Compressor

Compressor

After activating the spindle, generally fit the spindle protection cap again and tighten with 14-16 Nm. 
This serves as a second sealing feature during operation.

For  systems  with  long  pipes  and  higher  degree  of  contamination,  a  filter  on  the  suction-side  is 

 

recommended. The filter has to be be renewed depending on the degree of contamination (reduced 
pressure loss).
Moisture  in  the  refrigeration  circuit  can  lead  to  crystal  and  hydrate  formation.  For  this  reason,  we 
recommend using a filter drier and a sight glass with a moisture indicator.

4.8  Suction pipe filter and filter drier

Summary of Contents for BOCK UL-HGX44e







































Reviews: