Creating Vent Openings in the Mounting Backplate
Refer to
Illustration 1.3
for these steps.
1.
Cut out the intake and exhaust openings in the mounting backplate. The openings must match the drive module vent
openings.
2.
Drill the 12 screw holes around the exhaust (top) vent openings and insert the 12 M5 X 12 pem studs.
3.
Drill the 12 screw holes around the intake (bottom) vent openings and insert the 12 M5 X 12 pem studs.
Illustration 1.3 Vent Dimensions for Mounting Plate
Installation Instructions
In-back/Out-back Cooling Kit for VLT®
Parallel Drive Modules
VLT® Series FC 102, FC 202, and FC 302
MI92J102
Danfoss A/S © 04/2016 All rights reserved.
3
