6
0
2, 102E5, 102E7
Wiring
W
iring
10. Then press the
SELECT
button until the bar lines up
with the word
OFF
and check the system does not
operate.
11. Set the rocker switch to
WATER ONLY
. Press the
SELECT
button until the bar in the display lines up
with the word
ON
and check that the water circuit only
operates.
12. When the circuit check has been completed, replace
the wiring cover and tighten the
fi
xing screw. Cut
any cable aperture in the wiring cover which may be
necessary to accommodate surface mounted cables.
13. Finally set time of day and programmes required,
noting that the unit is supplied with a pre-set
programme, as stated on Page 14.
