7
VI.UH.R1.80
Produced by Danfoss Floor Heating Hydronics 0.2006
Instruction CF-RF Room Thermostat with InfraRed Floor Sensor
Changing default display temperature
- fig. 1.
. The actual room temperature is shown in the
display as default
2.
To change default display from actual room
temperature to actual floor surface tempera-
ture, press and hold the push button
until SET MAX is shown in the display
. Press the button shortly and repeatedly
until
or
is flashing in the display
4. Press the up/down selector to select the
new default display temperature:
Room temperature
Floor surface temperature
Setting of room temperature
. Make sure actual room temperature is shown
in the display
2.
Press the up/down selector to set the
desired room temperature value. SET is shown
in the display
. When releasing the up/down selector the
display returns to actual temperature
Note: The thermostat regulates the floor heating
system according to room temperature set point,
within the maximum and minimum limitations
defined for the floor surface temperature
Summary of Contents for 088U0213
Page 68: ...Fig 1 A1...
Page 69: ...Fig 2 Fig 3 1 5 m 0 5 m 0 25 m A2...
Page 70: ...088N2463 09 01 2006 Version 01...