![background image](http://html1.mh-extra.com/html/danfoss/088u0213/088u0213_instructions-manual_3396151006.webp)
5
VI.UH.R1.80
Produced by Danfoss Floor Heating Hydronics 0.2006
Instruction CF-RF Room Thermostat with InfraRed Floor Sensor
2. Installation
Note:
•
To activate batteries in the Room Thermostat,
please remove enclosed strips from the batteries.
•
The assignment of the Room Thermostats to the
Master Controller should be within 1½ m distance
Activate Install mode on
Master Controller - fig. 1.
• Use the menu selection button to select the
Install mode. Install LED flashes
• Activate Install mode by pressing OK
.
Install
LED goes ON
Activate Install mode on
Room Thermostat
• Press the push button
.
LED
and
flicker
during communication
Select output on Master Controller
• All available output LEDs on Master Controller
light up, and the first of them flashes
• Press output selection button , to select
desired output (flashes) and accept with OK
• All output LEDs
go OFF. Selected output
stays ON shortly
Summary of Contents for 088U0213
Page 68: ...Fig 1 A1...
Page 69: ...Fig 2 Fig 3 1 5 m 0 5 m 0 25 m A2...
Page 70: ...088N2463 09 01 2006 Version 01...