background image

Installation & Operation Manual 

RX Kits. For roof and gutter deicing applications 

 

4 | © Danfoss | FEC | 2020.02

AQ00008644904301-010201 / 088L3371

Danfoss RX Roof and Gutter De-Icing Cables

Thank you for choosing the Danfoss RX Roof and Gutter De-Icing Kit as the solution to your roof snow 

and ice problems. Danfoss is the world leader in electric radiant heating and the RX product has been 

designed to produce an effective and constant solution to protect your roof from ice dams and the 

related hazards.  The quality engineered RX heating cables provide a safe, flexible and economical 

solution to your snow and ice protection requirements.

High quality materials and workmanship ensure that Danfoss RX heating cables will bring years of 

maintenance free service.  Consequently, Danfoss RX is backed by a 5 year limited warranty.

If you have any questions or concerns during installation, don't hesitate to contact your local Danfoss 

Representative or Danfoss Technical Support directly toll-free:  1-888-DANFOSS (326-3677).  

Don't  forget to place the warning labels in the appropriate area.

THIS RX KIT CONTAINS
1. Heating Cable
2. Shingle Clips
3. Warning Labels
4. 6 ft power lead
5. Spacer Clips
6. Instruction Manual

The installer of the Danfoss RX heating cables should be familiar with installation methods outlined 

in this guide, as well as electrical wiring conventions.  The required outdoor power receptacle should 

be installed by a professional electrician.  National and local electric codes must be adhered to, and 

inspection may be required during or after installation of the Danfoss RX cables.

Skill Level

1. RX Cable Kit

2. Tape measure  to determine cable length estimate
3. Ladder  to access the roof and gutters
4. Putty knife  to lift shingles
5. Marking chalk  to make cable location/pattern on shingles
6. File  to remove sharp edges from gutters and downspouts to protect the cable

Required Tools and Materials

Cable Construction

Twin conductor

Rated Voltage

120 V

Output

5 W/ft (16.4 W/m)

Heating Element Size

30’ to 265’ (9.2 m to 80.8 m)

Bending Radius

Minimum 1.5” (38 mm)

Cable Diameter

1/4” (6.5 mm)

Power Lead length

6’ (1.82 m)

Wire insulation

FEP / XLPE Cross linked Polyethylene

Outer Insulation

PVC

Max. Rated Temperature

220 °F (105 °C)

Min. Installation Temp

40 °F (5 °C)

RX Cable Specifications

Summary of Contents for 088L3500






















Reviews: