background image

Installation & Operation Manual 

RX Kits. For roof and gutter deicing applications 

 

© Danfoss | FEC | 2020.02

AQ00008644904301-010201 / 088L3371 | 11 

Use and Maintenance

Each snow season:
•  Check cable position
•  Ensure all debris is removed
•  Inspect cable for damage, deterioration
•  Test GFI devices

When to operate the heating system:

Operate the RX system in the winter season when temperatures fall between 15 °F to 35 °F (-9 °C to +2 °C).  

In very cold temperatures, the RX system may not generate enough heat to prevent the formation of ice 

dams.  Turn off the system when ice dams have melted or temperatures are greater than 35 °F (2 °C).  

In the off season the system may remain on the roof.  Disconnect the system to ensure it isn’t accidentally 

turned on. Never operate the system when ambient temperatures are above 50 °F (10 °C) to prevent 

cable damage or fire hazard.

During the winter season, ensure the system is working efficiently by observing the melting path created 

by the heating cables.  Cable layout modification may be required to adapt to changing ice dams or 

incorrect design.

Use a weather-proof power outlet to prevent accidental GFI tripping.

An optional automatic system controller is available. Ask your Danfoss representative for details

POWER

HEATING

Code No

Description

Power Supply

Resistive Load 

(Output) max.

088L9000

RX1200 roof and 

gutter deicing 

controller

120VAC 50/60Hz

10.2A @ 120V 

(1225W)

Warranty

DANFOSS RX KIT WARRANTY

For a period of five (5) years from the date of purchase Danfoss warrants that the Danfoss RX Kit is free 

from defects in material, design and workmanship. The warranty is only valid with proof of sale, and the 

installation is in accordance with the installation instructions.

The defective Danfoss RX Kit has to be inspected by or submitted to Danfoss, or an authorized Danfoss 

RX dealer. Failure to comply with the before mentioned conditions  will void this warranty.

Danfoss will, when the customer has documented that a defect in the Danfoss RX Kit was present at the 

date of delivery, repair or supply a new Danfoss RX Kit at Danfoss' option. All claims shall be made within 

the warranty period.  Danfoss shall not be liable for any claims made later than five (5) years from date 

of purchase. Danfoss shall not be liable for any consequential and secondary costs or damages linked to 

the defect or replacement of the Danfoss RX Kit .

THE FOREGOING WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR 

IMPLIED, ON THE PART OF DANFOSS. DANFOSS DISCLAIMS ANY WARRANTY, EXPRESS OR IMPLIED, 

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. DANFOSS NEITHER ASSUMES NOR 

AUTHORIZES ANY OTHER PERSON, FIRM OR CORPORATION TO ASSUME FOR IT ANY OTHER LIABILITY 

IN CONNECTION WITH SALE OR PRODUCT. DANFOSS SHALL NOT BE HELD RESPONSIBLE FOR DAMAGE 

TO PERSON OR PROPERTY, CONSEQUENTIAL LOSS, LOSS OF PROFIT, LOSSES ON GOODS IN STORE, 

OR THE LIKE WHICH MIGHT ARISE OUT OF THE FAILURE OF THE EQUIPMENT DELIVERED, IRRESPECTIVE 

OF THE CAUSE (INCLUDING FAULTY MANUFACTURE).

Summary of Contents for 088L3500






















Reviews: