Continuity tester
3
User Guide
Introduction . . . . . . . . . . . . . . . . . . . . . . 3
Continuity tester components . . . . . . . . . . . 4
Safety instructions . . . . . . . . . . . . . . . . . . 4
4 Preparation . . . . . . . . . . . . . . . . . . . . . . . 5
5 Operation . . . . . . . . . . . . . . . . . . . . . . . . 6
Standard compliance. . . . . . . . . . . . . . . . . 9
7 Warranty. . . . . . . . . . . . . . . . . . . . . . . . . 9
Table of Contents
1
Introduction
Underfloor heating elements are strong but they can be
damaged during installation & tiling. We recommend
the Continuity tester to monitor your heating cables or
mats during every installation step.
When connected to the underfloor heating mats, the
alarm will sound when continuity is lost between the two
heating conductors or if continuity develops between the
ground wire or shield and one of the heating conductors.
If alarm sounds, stop work and check troubleshooting
page in the User guide.
Product number: 088L0028
