DANFI AUDIO TE-2017, User Manual

Page: 8 / 10

(Lift up the tone arm and put it on the rest)

Turn on the Power Switch (8), then press “ M” button (16)till enter into FM mode. The display (11)
shows “ FM 87.5 MHz” .

Release the FM antenna (20) and adjust the position to get .

Press the button (14) to mute the sound . Press again to restore the sound.

Press and hole the button (14) to automatic search FM radio. The tracks will be saved as P01, P02,
P03 ... when finished scan.

Press the Button (13) or (15) to select previous or next track.

Press and hold the Button (13) or (15) to previous or next track scan.

Adjust volume by volume control (8).
Aux in function
(Lift up the tone arm and put it on the rest)

Turn on the Power Switch (8), and Insert aux in cable (not supplied) to Aux in jack (12) then press “ M”
button (16) till enter into Aux in mode. The display (11) shows “ LINE” .

The other side of aux in cable connect your devise, then you can enjoy the music.

Press the button (14) to mute the sound . Press again to restore the sound.

Adjust volume by volume control (8).
Note: The buttons
(13) or (15)
is useless when Aux in mode. You can adjust the tracks by your
devise.
USB/TF recording

Turn on the Power Switch (8), and Insert your TF or USB card to slot (17) or (18 ).Press “ M” button (16)
till enter into Phono /Aux in /FM mode.

Then press and hold the “M” button (16) till the display shows ”rEC”, then press the button (14) ,
you will hear one time beep sound. It begins to record songs from Phono /Aux in /FM to USB or TF
card.

Stop recording. Press and hold the “M” button (16) till the display shows “STOP”, then press the button
(14) , you will hear two times beep sound. It stop recording and save the recorded songs to USB or
TF card as the last song.

Press “ M” button (16) till enter into USB or TF card mode to enjoy the recorded song.