danew K504, Getting Started Manual

Page: 7 / 38

7
Press and hold the Power button for a few seconds to turn on the device.
When you turn on your device for the first time or after performing a data
reset, follow the onscreen instructions to set up your device.
To turn off the device, press and hold the Power button, and then tap
Power off.
Pressing the Power button turns off the screen and locks it. Also, the screen
turns off and automatically locks if the device is not used for a specified
period.
To unlock the screen, press the Power button or the Home button and flick
your finger in any direction within the unlock screen area.
Charge the battery
Turning the device on and off
Locking and unlocking the screen
To power or charge the phone, use only the universal charger supplied in
the box (5 V 2A model). The use of unapproved charger presents the risk
of electric shock or burns. if the device is damaged due to improper use,
the warranty will be void.
We recommend that you fully charge the battery for the first three charge
times.
The battery should never be allowed to discharge fully, full discharges
(under 10%) cause damage to the battery and wears is off prematurely.
Since the battery is lithium-ion, you can charge it partially without a risk
of damage.
Note : To avoid electrical damage, use only the universal charger supplied
or a genuine Danew charger to charge the device.