Dane Technologies, Inc.
SmartKART Series
Service Manual
7105 Northland Terrace Minneapolis, MN 55428 / 888-544-7779 / 763-544-7779 / Fax 763-544-4234
www.danetechnologies.com
970-032 Rev. A 1/20/09
18
ORIENTATION TO THE SmartKART
Pressing the "HORN" button will sound the horn as long as it is pressed.
Handle Controls
The handle includes forward/reverse throttle control levers, “On/Off” switch, horn switch,
and a battery indicator meter. The Dane SmartKART should be parked and turned off
using the “On/Off” while not in use.
Occupant Seat Switch
The occupant seat switch is located under the seat. The occupant’s weight on the seat
activates the switch allowing the SmartKART to operate.
WARNING!
A seat switch that is not properly maintained or is disconnected may cause
personal injury and property damage.
STEERING: The SmartKART is turned by exerting light pressure to move the tiller
handle, to the left or right, similar to steering a bicycle.
ACCELERATION AND BRAKING: Acceleration and braking of the SmartKART are
controlled by the throttle control located on both sides of the handle bar. SmartKART
speed is controlled by pushing the throttle control. Braking action occurs as pressure is
released. Braking force can be controlled for quick or gradual stops. Releasing the
control slowly brings the SmartKART to a gradual stop. Releasing it rapidly stops the
SmartKART very quickly. Maximum braking force is applied when the throttle is fully
released.
Manually Moving the SmartKART
To move by hand, empty all materials from the basket. Lift front of machine by pulling
up on the basket. Pull entire machine to desired location.
To Order Parts Call 1-888-702-5326 - https://monsterfloorequipmentparts.com
