LED Functionality Index
Zpen User’s Guide
45
o
A: Yes. The current version allows two or more users to sit next to each
other and work without worrying for interferences
-
Is it compatible with MAC and Linux operating systems?
o
A: All digital files captured by the Zpen’s receiver can be viewed in
MAC OS X and several Linux operating systems using the
Multiplatform Viewer stored on the receiver itself
Getting started
-
The PC does not recognize the receiver after plugging it in.
o
A: Change the USB port and USB cable and try again. If it still does
not recognize the receiver, restart the receiver by pressing the Reset
button on the back of the receiver (small hole near one of the edges).
-
The receiver’s error LED (right most LED) blinks when operating the device
for the first time.
o
A: The receiver’s battery arrives uncharged. Charge the device for 6
hours (the power LED should blink while charging) before first use.
-
How do I use the receiver when writing on a thick pad of paper?
o
A: Clip the receiver to the side of one of the pages (or to the bottom, as
long as you maintain a clear line-of-sight) and start writing.
Receiver
-
How many digital pages can the receiver store?
o
A: Several thousand pages (an average page size is approximately
300KB).
-
How do I know when to charge the receiver?
o
A: When the receiver’s battery LED (right most one) starts blinking,
this signals that the receiver battery is running low and should be
recharged (in this case you will have several more minutes before the
receiver shuts itself down automatically).
-
When plugging the receiver in to my computer, I do not see the power LED
blinking; what’s wrong?
