July 31, 2019
8 Part#: 212-0042
Programming Master Switch
SLIDE 1
1) Enter setup mode Enter by holding SW3+SW8 and wait for the 2 beeps
2) Select which switches will be ON with Master.
3) Save the configuration; press and hold SW9 (STBY/PA) until the long beep, this confirms the
program is saved.
SLIDE 2
1) Enter setup mode Enter by holding SW4+SW8 and wait for the 2 beeps
2) Select which switches will be ON with Master.
3) Save the configuration; press and hold SW9 (STBY/PA) until the long beep, this confirms the
program is saved.
SLIDE 3
1) Enter setup mode Enter by holding SW5+SW8 and wait for the 2 beeps
2) Select which switches will be ON with Master.
3)
Save the configuration; press and hold SW9 (STBY/PA) until the long beep, this confirms the
program is saved.
Figure 4.1 - Program
Master Switch 1
Figure 4.2 - Program
Master Switch 2
Figure 4.3 - Program
Master Switch 3