D&H DH05A/B, Manual, Page: 26 / 36

26
041 Operating system Occurs during the programming
automatically:
Bit
System Value
0 SX1 1
1 DCC 2
2 SX2 4
1, 2, 4 2
051 Characteristic diagram Response curve
0 = linear
7 = logarithmic
See supplement 2 0 – 7 5
052 Regulation variant 0 = User defined by par056 ff.
1 = Hard
2 = Soft
3 = Very Soft 0 – 3 2
053 Impulse width 0 = 1 ms
1 = 2 ms
2 = 4 ms
3 = 8 ms 0 – 3 1
054 Motor frequency 0 = 32 kHz, 1 = 16 kHz
2 = low frequency 0 – 2 0
056 Motor proportional controller Only if activated by par052 = 0 0 – 7 3
057 Motor integral controller Only if activated by par052 = 0 0 – 3 3
058 Motor measurement period Only if activated by par052 = 0 0 – 3 1
059 Motor impulse width Only if activated by par052 = 0 0 – 7 3
061 Function mapping F0(f) See supplement 1 0 – 255 1
062 Function mapping F0(r) See supplement 1 0 – 255 2