d&b audiotechnik Z5600.552, Manual

Page: 7 / 22

2.1 Handling
The Touring Rack is equipped with two sliding doors allowing
quick and easy access to the front and rear panels of the devices.
1. Unlock the door lock mechanism.
2. Open the door.
3. Push the door into its park position.
2.2 Cooling and placement
NOTICE!
Risk of malfunction due to overheating!
Make sure both the front and rear doors are opened and
pushed into their park positions to provide sufficient cooling.
When using the d&b Z5600.552 Touring rack assembly, make
sure to provide sufficient space of 0.5 m (1.6 ft) at the front and
rear of the touring rack to ensure adequate cooling airflow.
CAUTION!
Risk of personal injury and/or damage to
material due to possible tipping over!
To avoid possible tipping over, do not move stacked touring racks.
D40 Touring rack assemblies as well as D40 and D20 Touring
racks can be stacked or positioned side by side.
When combining D40 Touring rack assemblies with Z3010 D12
Touring rack assemblies or any other rack assemblies that produce
an opposing airflow, observe the following restrictions:
▪ Do
not stack D12 Touring racks or any other rack assemblies
with opposing airflow on top of the D40 Touring rack.
▪ D40 and theD12 Touring rack assemblies can be positioned
side by side.
2 Handling, cooling and placement
d&b Z5600.552 Manual 1.2 en 7