2.1.
Rigging components
Q-Series arrays suspended by the Z5159 Q Flying frame are assembled
using the following rigging components:
2.1.1.
Z5159
Q
Flying
frame
Fig. 2: Z5159 Q Flying frame
The Z5159 Q Flying frame is designed to support arrays consisting of the
following loudspeakers:
Code
Type
Weight incl. array links
Z0510
Q-SUB
42 kg (93 lb)
Z0501
Q1
23 kg (51 lb)
Z0507
Q7
23 kg (51 lb)
Z0511
Q10
23 kg (51 lb)
The weight of the Q Flying frame is 13 kg (29 lb)
80 [3.2"]
4 [0.16"]
12.5 [0.5"]
7 [0.3"]
603 [23.7"]
589 [23.2"]
685 [27"]
Fig. 3: Z5159 Q Flying frame dimensions in mm [inch]
2.1.2.
Z5155
Q
Hoist
connector
chain
Fig. 4: Z5155 Q Hoist connector chain
The Z5155 Q Hoist connector chain is used to connect the lifting motor(s)
to the Q Flying frame using one or two 1t Shackles supplied with the
connector chain. Its length of 52 cm (20.5“) allows enough space for the
hang of most 1t motor chain containers.
2.1.3.
Z5154
Q
Rigging
set
a)
b) c )
Fig. 5: Z5154 Q Rigging set
One set is required for each Q-Series cabinet within a vertical array. The
rigging set includes the following components:
2 x Z5151 Q Splay link
[a]
2 x Z5152 Q Front link
[b]
8 x Z5153 Locking pins 8 mm (linked in pairs with a steel wire)
[c]
Q-Series Rigging manual
(1.2EN)
Page 6 of 20
