E12, E12-D
Fig. 1: E12 loudspeaker
The E12 is a high performance multipurpose loudspeaker employing an
integrated 12”/1.3” exit coaxial driver design with neodymium magnet
and constant directivity horn loading. It is available in two different
dispersion versions, the E12 providing a 80° x 50° dispersion pattern
(hor. x vert.), the E12-D a wider 110° x 50° pattern. Both horns are
easily rotatable through 90° without the use of tools, providing
50° x 80° or 50° x 110° dispersion patterns.
The E12 is a two way design with a built in passive crossover network.
Its frequency response extends from 50 Hz to above 17 kHz.
E12
and
E12-D
have
identical
enclosures
constructed
from
polyurethane integral hard foam with an impact and weather resistant
black paint finish. The cabinet shape allows use either in a vertical or
horizontal orientation as well as deployment as a stage monitor.
The front of the loudspeaker cabinet is protected by a rigid metal grill
in front of an acoustically transparent foam. The grill can easily be
removed without tools to modify the horn orientation.
The cabinets incorporate a pair of handles, a recessed pole mount
socket and six M10 threaded inserts to connect to different rigging
accessories like Z5352 E12 Flying bracket, Z5354 E8/E12 Flying
adapter, Z5020 Flying adapter 02, Z5025 Flying adapter 03 or Z5353
E12 Horizontal bracket. An additional M10 thread in the rear panel
can be used to connect a safety wire.
NOTICE:
Only operate E12 loudspeakers with a correctly configured d&b
amplifier, otherwise there is a risk of damage to the loudspeaker
components.
Please note that E12 and E12-D require different controller setups and
therefore cannot be wired in parallel.
Fig. 2: E12, E12-D SC/WR versions top and
bottom view
E12, E12-D cabinet options
The special color (SC) version of the cabinet is available in all colors of
the RAL color table. It comes without hi stand flange and handles. The
respective openings of the cabinet are covered by plates in cabinet
color. The connector type is NL4.
The weather resistant (WR) version is available in black only. It also
comes without hi stand flange and handles. It is equipped with a fixed
input cable (5 m / 16.4 ft, type H-07-RN-F 2 x 2.5 mm
2
/AWG 13).
E12, E12-D Manual
(1.2 EN)
Page 4 of 10
Summary of Contents for E12
Page 1: ...E12 E12 D Manual 1 2 EN ...
