4
Please assemble the frame as below steps. They have similar assemble steps. Here we take 6x6 for example .
Step 1
When assembling the tent, make sure that all the wingnuts
are attached to the inside.
Connect one center arch pipe(8) with the extension pipe
Attached the corner arch(7) to the ends of the extension
pipe(6). Now connect the ceiling rail(4 and 5) with each other
using the 1.75”(22) screw and the wingnuts(25). Connect the
ceiling rail with respective extension pipe(6) using the
2.5”(23) screws and wingnuts(25).
Step 2
Repeat step 1 for the next 5/10/15 elements to place them
on the ground one after another, as illustrated.
Attention: all elements with extension pipe no.6 need to be
placed at the ends. Extension pipe no.6 has holes for door
pillar.
Step 3
Now connect the 6 arch elements with each other using the
connecting pipes (9 and 10). Not that only corner arch 10 are
used for the front segments. Use the 4”(24) screw and
wingnut(25)to tighten them.