OPERATION
Site your heater outside or in a large open area and well away from any obstructions such as
branches, or where the heater is near any objects that can be affected by heat, such as furniture,
curtain or other flammable objects. Minimum clearance is 1 meter.
Place the heater on a firm, level surface and plug it into a grounded 220-240V/50-60Hz power
outlet. Only operate the heater when it is in upright position and the base is attached. This
heater is equipped with a ON/OFF pull switch.
TURNING THE PATIO HEATER ON AND OFF BY REMOTE CONTROLLER
-
Insert the plug into a socket.
-
Please turn on the rocker switch on heater.
-
Please press ON/OFF on the remote controller to use the heater. To
adjust power, please press MAX, MED or MIN for desired heat.
-
To turn off the heater, press ON/OFF button again on the remote
controller. For a long period of inactivity, please turn off the switch on
heater, and pull the plug off.
TURNING THE PATIO HEATER ON AND OFF BY TOUCH SWITCH
-
Insert the plug into a socket.
-
Please turn on the rocker switch on heater.
-
Please press POWER SETTING to adjust power for desired heat.
-
For a long period of inactivity, please turn off the switch on heater,
and pull the plug off.
-
After using the heater, it always must be turned off with the button or the remote control and the
power plug must be pulled out of the socket.
-
Allow the heater to cool completely before moving and storage.
-
Never use the heater when there are bad weather conditions like rain, snow, hail, or a
thunderstorm.
-
Pay attention that, no combustible material due to wind or other environmental influences covers
or obstructs the appliance, such as curtains, marquees, flags, plastic foil etc.
ADJUSTMENT OF HEATER HEAD
Heater head can be adjusted up or down only after handle knob is turned loose.
WARNING: Please do not adjust heater head after its tightly locked, to do so will damage your
heater.
7
