5.
Install a AA battery(18) into the
control box, then, fix the control
box(2) underneath the middle plate(1)
with screws (15)
6.
Carefully put the glass tube(8) up
through the centre hole in the upper
plate(6), Make sure the rubber ring is
attached on the lower end of the glass
tube(8). Move and sit the glass tube(8)
through the hole of the plate cover(7)
on the middle plate(1), check and
ensure that the glass tube(8) cover the
centre hole of the middle plate(1)
7. Fix the reflector (10) onto the damper
(9).
8. Attach the protection guards (11) onto
the frame by placing its hooks into the
holes of the frame. Fix the guards with
the fixing brackets(12)
7
