Dancover GH140040, Manual

Page: 3 / 24

LIST OF PARTS (1):
Name Length,
mm
TITAN Classic 480
4.98m2 7.45m2 Extension
2.35x2.12m 2.35x3.17m 2.35x2.00m
No. 1 Side - lower bar 1890 10 14 8
No. 2 Upper bar 1345 10 14 8
No. 3 Fixing profile for doors and a ridge 425 15 21 12
No. 4 Fixtures into the ground 200 14 18 8
No. 5 Bar fixing – cross bars for 3.17m greenhouse 3120 4
No. 6 Bar fixing – cross bars for 2.12m greenhouse 2065 4
No. 7 Bar fixing – cross bars for greenhouse extension 2070 4
No. 8 Door and back bar 2235 4 4
No. 9 Door and back bar holder (at the top) 1025 2 2
No. 10 Side fixtures for the front-rear part 630 4 4
No. 11 Fixtures for the rear part (in the middle) 920 1 1
12 Connector of the upper bar (a plate with 4 holes) 15 21 12
13 Sides of the foundation for 3.17m length greenhouse 3115 2
14 Sides of the foundation for 2.12m length greenhouse 2065 2
15 Sides of the foundation for greenhouse extension 2065 2
16 Front and back parts of the foundation 2350 2 2
17 Foundation angles 4 4
18 Foundation connection plates 4
19 Polycarbonate connection angles (large angle) 14 14
20 Polycarbonate and bar connection angles (small
angle) 8 8
21 Polycarbonate connection plates (with 2 holes) 5 5
22 Ridge for 2.12 m length greenhouse 2120 1
23 Ridge for 3.17 m length greenhouse 1590 2
24 Ridge for greenhouse extension 2005 1
25 Set of handles 3 3
26 2.15x12 mm screw (yellow) 12 3 3
27 M5-12 bolts with pan head 12 295 351 120
28 M5-20 bolts 20 49 61 24
29 M5-40 bolts 40 126 154 56
30 M5 nuts 470 566 200
31 Gasket, transparent (round, 4 cm diameter) 137 161 48
32 Plastic connecting H-profile 1470 2 4 4
33 Plastic connecting H-profile 1320 2 4 4
34 Ending U-profile (flexible) or breathing strip 8,02m 10,14m 4,02m
35 Eyelet bolt with a holder 3 3
36 Sealing rubber (grey) m 12 12
37 Ridge fixing holders 2 2 2
38 Ending F-profile holders 20x140 4 6 2