6
5
04
Wing installation
机翼安装
05
Install the motor and engine
安装马达，引擎
安装桨叶，用桨夹固定。
Install the propeller and
fix it with prop adapter.
马达安装示范 Motor installation demonstration
在舵面上，垂直于舵角的位置安装舵角，用M2钻
头钻孔，用螺丝固定舵角。
Install the rudder horn perpendicular to the
rudder surface, drill with an M2 drill bit, and
fix the rudder horn with screws.
如图安装机翼上舵机，舵
机线从机翼侧面导出。
Install the servo on the
wing, and the servo
line is derived from
the side of the wing.
副翼通过纸合页连接到机翼，用CA胶粘固。粘好后保持副翼可以自由摆动。
The aileron is connected to the wing through paper hinges and is cemented with CA
glue. Keep the aileron free to swing after being glued.
副翼上安装舵角，安装钢丝连杆连接舵机。钢丝连杆Z型一端穿入
舵臂，另一端通过快装接头连接舵角。
The rudder horn is installed on the aileron, and the steel wire
connecting rod is installed to connect the servo. One end of
the Z-shaped steel wire connecting rod goes through the
rudder arm, and the other end connects the rudder horn
through the EZ-connector.
M1.5
04-1
05-1
05-2
05-3
04-2
04-3
04-4
04-5
04-6
纸合页
Paper hinges
自攻螺丝
Self-tapping screw
M3x10mm
X3
Screw
M4*15mm
X4
手拧螺丝
Self-tapping screw
X2
螺丝M4*15mm
