8
Power System Installation and Adjustment
电子设备安装调试
更多电子设备调试细节可参考以下链接查看（可直接扫二维码）
More details about power system adjustment, please refer
to below link: (You can scan QR Code directly.)
http://www.dwhobby.com/art/connection
03-9
03-10
机翼插入机身，连接
处用泡沫胶粘固。
Insert the wing into
the fugelage,and
glue firmly with
foam glue.
GL
UE
用螺丝把马达固定到机头，并在马达上安装快装接头和桨叶。
Fix the motor to the aircraft nose with screws, and install the
EZ-connector and the propeller onto the motor.
马达安装时设置右拉下拉角2°
When install the motor, please set the right pull-down angle
2°
04-01
舱身内电子设备安装示范。
Demonstration of the installation of electronic equipment
in the cabin.
此处推荐 AEO RX15X-E系列多合一接收机。
AEO RX15X-E series all-in-one receiver is recommended
here.
说明链接：Description link:
https://www.aeorc.com/rx14amp14eamp15e-se-
ries-mini-receiver-user-manual-a0074.html
04-04
04-02
起落架安装 Install the Landing Gear
05-01
塞入F14-1
Insert F14-1
05-02
05-03
组装两个
Assemble two
堵头
Stoppers
05-04
D2*2
舵机线按上图放置，引导到舱身位置。
The servo line is guided to the position of the fuselage
body according to the position shown in the figure
above.
连接好电子设备后，粘贴A3到机身，用泡沫胶粘合。
After connecting the electronic equipment, paste A3 to the
fuselage and glue with foam.
GL
UE
A3
04-03
CA
CA
7
