INSTALLATION INSTRUCTIONS
REQUIRED TOOLS
• 1/4” nut driver
• 3/8” socket with ratchet
• 3/8” open end wrench
• Adjustable wrench or 7/16” socket with ratchet
• Adjustable wrench or 9/16” open end wrench
• Channel lock adjustable pliers
• Carpenter’s level
INCLUDED ACCESSORIES
1. Two water hoses
2. Four transport hole plugs
3. Drain hose holder: attach to the end of the drain
hose to secure it to a sink.
1
2
3
LOCATION
• The location must be large enough to allow the
appliance door to open fully. The door can open
more than 90
°
and is not reversible.
• It is recommended to allow 2.5 cm (1”)of space
on all sides of the appliance to reduce noise.
• The floor must be level and strong enough to
support the appliance when it is fully loaded.
• It is not recommended to install this appliance on
carpeting.
• The appliance must be located within 95.25 cm
(37.5”) of the power supply if located to the left
of the unit, 1.3 m (55”) if it is to the right of the
unit.
• The appliance must be located within 1.4 m
(57”) of the water supply if located to the left of
the unit, 95.25 cm (37.5”) if located to the right
of the unit.
• The appliance must be located within 92.25 cm
(37.5”) of the drain if located to the left of the
unit, 1.5 m (60”) if located to the right of the
unit.
• Do not operate this appliance in temperatures
below 0
°
C (32°F) as water inside the hoses
or appliance could freeze and damage the
appliance.
• Avoid placing the appliance in direct sunlight.
• Do not place the appliance near heat sources.
DIMENSIONS
Height: 84.5 cm (33.26”)
Width: 59.7 cm (23.46”)
Depth: 58.2 cm (22.91”)
5
