background image

LIMITED AIR CONDITIONER WARRANTY

This quality product is warranted to be free from manufacturer’s defects in material and workmanship, provided that the unit is used under the normal operating

conditions intended by the manufacturer.
This warranty is available only to the person to whom the unit was originally sold by Danby or by an authorized distributor of Danby, and is non-transferable.

TERMS OF WARRANTY

Plastic parts, are warranted for thirty (30) days only from purchase date, with no extensions provided.
First 12 Months

During the first twelve (12) months, any electrical parts of this product found to be defective, including any sealed system units, will be

repaired or replaced, at warrantor’s option, at no charge to the ORIGINAL purchaser.

Additional 48

During the next forty-eight (48) months any part of the sealed system found to be defective (consisting of compressor, condenser, evaporator, 

Months

dryer and all related tubing) will be replaced without charge.  The purchaser shall pay for all labor and return freight during this period for

repair or replacement of any sealed system components.  Any unit being diagnosed as non-functional due to sealed system failure and

warranting an exchange  will be subject to an appropriate depreciation or user fee, including any and all freight charges being levied

against the consumer.

To obtain

Danby reserves the right to limit the boundaries of “In Home Service” to the proximity of an Authorized Service Depot.  Any appliance

Service

requiring service outside the limited boundaries of “In Home Service” ,

i

t will be the consumer’s responsibility to transport the appliance (at

their own expense) to the original retailer (point of purchase) or a service depot  for repair.  Contact your dealer from whom your unit was 

purchased, or contact your nearest authorized Danby service depot, where service must be performed by a qualified service technician.
If service is performed on the units by anyone other than an authorized service depot, or the unit is used for commercial application, all 

obligations of Danby under this warranty shall be at an end.

EXCLUSIONS

Save as herein provided, Danby Products Limited (Canada) or Danby Products Inc. (U.S.A.), there are no other warranties, conditions, representations or

guarantees, express or implied, made or intended by Danby Products Limited or its authorized distributors and all other warranties, conditions, representations or

guarantees, including any warranties, conditions, representations or guarantees under any Sale of Goods Act or like legislation or statue is hereby expressly

excluded. Save as herein provided, Danby Products Limited (Canada) or Danby Products Inc. (U.S.A), shall not be responsible for any damages to persons or

property, including the unit itself, howsoever caused or any consequential damages arising from the malfunction of the unit and by the purchase of the unit, the

purchaser does hereby agree to indemnify and save harmless Danby Products Limited from any claim for damages to persons or property caused by the unit.

GENERAL PROVISIONS

No warranty or insurance herein contained or set out shall apply when damage or repair is caused by any of the following: 

1) Power Failure.
2) Damage in transit or when moving the appliance.
3) Improper power supply such as low voltage, defective house wiring or inadequate fuses.
4) Accident, alteration, abuse or misuse of the appliance such as inadequate air circulation in the room or abnormal operating conditions,

(extremely high or low room temperature).

5) Use for commercial or industrial purposes.
6) Fire, water damage, theft, war, riot, hostility, acts of God such as hurricanes, floods etc.
7) Service calls resulting in customer education.

Proof of purchase date will be required for warranty claims; so, please retain bills of sale.  In the event warranty service is required, present this document to our

AUTHORIZED SERVICE DEPOT.

Danby Products Limited

PO Box 1778, 5070 Whitelaw RD, Guelph, Ontario, Canada  N1H 6Z9

Telephone:  (519) 837-0920  FAX:  (519) 837-0449

Danby Products Inc.

                         PO Box 669, Findlay, Ohio, U.S.A. 45839-0669

Telephone:  (419) 425-8627  FAX:  (419) 425-8629

06/06

Warranty Service

 In-home 

   

Summary of Contents for Diplomat DAC7037M













Reviews: