OPERATING INSTRUCTIONS
FEATURES
1. Control panel
2. Handles (both sides)
3. Water bucket
4. Water level indicator
5. Air outlet
6. Air fi lter
7. Continuous drain outlet
8. Power cord storage strap
9. Power cord storage band
10. Power cord
CONTROL PANEL
1. Auto defrost light:
The light will illuminate when frost builds up
on the evaporator coils. The compressor will cycle off and the fan
will continue to run until the frost melts.
2. Bucket full light:
The light will illuminate when the bucket is full
or incorrectly positioned inside the cabinet. The compressor and
fan operation will stop as a safety feature. When the bucket is
emptied or correctly re-positioned the dehumidifi er will resume
operation automatically.
3. Display:
Shows the actual (± 5% accuracy) room humidity level
in a range of 30% to 90%. Otherwise, displays selection when
programming humidity or timer.
4. Smart dehumidify:
This function will automatically adjust the
humidity level with the fl uctuating room temperatures. The
humidity level cannot be adjusted in this setting, it will stabilize
between 45% - 55%. Press the humidity adjust buttons to cancel
this feature.
5. Filter button:
The check fi lter light will illuminate after 250 hours
of operation. After cleaning the fi lter, press the fi lter button to turn
off the light.
6. Continuous button:
Press to activate the continuous dehumidifying
operation.
7. Fan button:
Press to select normal or high fan speed. The light
will illuminate when set to high fan speed.
8. Timer button:
Press to set the timer.
9. Humidity adjust buttons:
The humidity level can be set within
a range of 35% to 85% relative humidity in 5% increments. For
drier air, set to a lower percentage value. For more damp air, set
a higher percentage value.
10. Power button:
Press to turn the dehumidifi er on or off.
1
2
4
5
6
7
3
8
9
10
5
6
7
8
10
9
3
2
1
4
