2
Important Safety Information
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS!
• WARNING: To reduce the risk of fi re or electric shock, do not use this
fi replace with any solid-state speed control devices.
• Do not operate any fi replace with a damaged power cord or after
the fi replace malfunctions, has been dropped or damaged in any
manner. Return the fi replace to an authorized service facility for
examination, electrical or mechanical adjustment or repair.
• Do not run the power cord under carpeting. Do not cover the power
cord with throw rugs, runners or similar coverings. Arrange the
power cord away from traffi c area where it will not be tripped over.
• To prevent possible fi re, do not block the air intakes or exhaust in any
manner. Do not use the fi replace on soft surfaces like a bed or thick
carpeting where the air intakes may become blocked.
• This
fi replace has hot and arcing or sparking parts inside. Do not
use the fi replace in areas where gasoline, paint, explosive and/or
fl ammable liquids are used or stored. Keep the fi replace away from
heated surfaces and open fl ames.
• To avoid fi re or shock hazard, plug the fi replace directly into a 120 V
AC electrical outlet. Never use an extension cord or power strip.
• To disconnect the fi replace, turn the controls to off and then remove
the plug from the outlet. Pull fi rmly on the plug, do not unplug by
pulling on the cord.
• Always unplug the fi replace before moving or cleaning it. Unplug the
fi replace when it is not in use.
• Use only for intended household use as described in this manual.
Any other use not recommended by the manufacturer may cause
fi re, electric shock or injury to persons. The use of attachments is not
recommended.
