OPERATING
INSTRUCTIONS
INSTALLATION
INSTRUCTIONS
•
Large flat blade screwdriver
•
Pencil
•
Socket wrenches
•
Level
•
Adjustable wrench or pliers
•
Tape measure
•
Phillips screwdriver
TOOLS REQUIRED
ELECTRIC SHOCK HAZARD
To avoid the possibility of personal injury, disconnect
power to the unit before installing or servicing.
•
Check window opening size against dimensions of your
unit.
•
Check condition of window; all wood parts of window
must be in good shape and able to firmly hold the needed
screws. If not, make repairs before installing unit.
•
Check for anything that could block airflow; check area
outside window for things such as shrubs, trees, or
awnings. Inside, be sure furniture, drapes or blinds will
not stop proper airflow.
•
Carefully unpack air conditioner. Remove all packing
material, and check for all included installation hardware.
BEFORE INSTALLING
11
CHANGING THE
BATTERIES ON THE
REMOTE
CR2
025
CR 2
025
1
2
1
2
+
A
B
The remote controller is powered by
one button cell housed in the rear part
and protected by a cover. Remove the
button cell according to the arrow
marked at the back of the remote
controller.
1.
Slightly press “A” position
according to the number 1
arrow direction by your
forefinger.
2.
Press “B” position and pull it
according to the number 2
arrow direction by your
thumb.
3.
The above step 1 and 2
should be done simultaneously
to slide the button cell out.
1
2
1
2
+
7/16” locking screw
& flat washer for
window panels
1/2in.(13mm)
long Hex-head
screw
Safety Lock
1/2in.(12.7mm)
long screw and
locknut
3/4” long flat head
bolt and locknut
Sill Angle Bracket
5/16in. long Hex-head
locking screw for top
angle side retainer.
13/16in. (20mm)
screw
Frame lock
2 each
4
1
4 each
2 each
2
10
2
2
Fig. 1 INSTALLATION HARDWARE
Foam insert
2
Window sash
seal foam
1
Model type:
DAC250EB1GDB DAC150EB1GDB/
DAC180EB1GDB
Unit height: 18 5/8” 17 5/8”
Unit width: 26 1/2” 23 5/8”
Min. window opening: 19 1/2” 18 1/2”
Min. window width: 31” 26 1/2”
Max. window width: 42” 40 1/2”
