background image

E-

2

The following safety precautions must be taken when installing 
and using your air conditioner.

Safety Precautions

1

The air conditioner must be plugged into its own specific power source, which must be 

installed in compliance with national wiring, earthing and safety regulations.

Depending on national regulations and your specific installation, you may need to install:

◆ 

A circuit breaker

For further information on electrical requirements, contact a professional electrician.

This device must be installed according to the national electrical rules.

2

Make sure that the unit is correctly ventilated at all times; 

do NOT place clothing or other materials over it.

4

Do NOT insert anything between the air outlet blades, as it may damage the inner fan 

and you may get hurt. Keep children away from the unit.

5

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard. 

6

Do NOT attempt to repair the unit yourself. If it is damaged in any way, contact:

◆ 

An authorized service center

◆ 

The dealer from whom you purchased the air conditioner.

7

Do NOT place any blocking objects in front of the unit.

3

NEVER spill liquids of any kind into the unit. 

Should this happen, unplug the unit and contact your installation specialist.

8

If the remote control will not be used for a long time, remove the batteries.

9

Before throwing out the device, it is necessary to pull back the battery cells      

and get rid of them safely.

10

The appliance is not intended for use by young children or infirm person without supervision;

young children should be supervised to ensure that they do not play with the appliance.

11

Do NOT use an extension cord with this product.

The manufacturer does not assume responsibility for accidents or injury
caused by an incorrectly installed air conditioner. If you are unsure about
installation, contact an installation specialist.

C

C

C

A

A

U

U

T

T

I

I

O

O

N

N

Summary of Contents for ArcticAire AAC5040















Reviews: