Danbit H.264 DVR User Manual Download Page 23

Page: 23 / 120

(5) After you set the screen pattern, use the fisheye channel list to select one of

the sub screens. (just as the circle on the picture above). The selected sub

screen will be indicated in a red frame.

(6) For the selected sub screen, use the 4-direction arrows

and the “+” (zoom

in) ”-” (zoom out) icon for E-PTZ control.

(7) Control Mode: Select the E-PTZ moving mode, step by step or continuous.

(8) The AutoPan, Stop, and Patrol buttons are invalid here if the fisheye camera

doesn’t support those function.

DISK INFORMATION

Displays the disk information on live mode.

DIGITAL ZOOM

On live full screen mode, left-click to select a zoom-in or zoom-out range for the

image. The users can right-click for disabling this function. (

NOTE:

the image can

be zoom-in to max. 16x.)

AUDIO VOLUME

Press this button, and the audio volume control board will pop up.

Summary of Contents for H.264 DVR

























































































































Search results

Summary of Contents for H.264 DVR

Reviews:

Related manuals for H.264 DVR

Brands by name

Popular brands

Danbit H.264 DVR, User Manual

Search results

Summary of Contents for H.264 DVR

Reviews:

Related manuals for H.264 DVR

Brands by name

Popular brands