33
NOTE:
We recommend that you change the thin tube and domes
every three months or sooner if it gets stiff or brittle.
NOTE:
Use only original consumables e.g. tubes and domes.
11.3
i
Cleaning earmoulds
1. Detach the earmould and tubing from the hearing aid before cleaning
2. Use a mild soap to clean the earmould and rinse with lukewarm water
3. Dry the earmould thoroughly. Use the airbulb and cleaning wire to
remove residual water and debris from the tubing
i
NOTE:
Use the wire loop on the brush to remove wax etc.
NOTE:
We recommend that you change the tube every three months
or sooner if it gets stiff or brittle.
Cleaning metal hook
Remove the earmould and tubing from the metal hook
Use a damp cloth to wipe down the metal hook, tubes and the domes
Use a mild soap to clean the tube and the earmould. Rinse with lukewarm
water.
Dry thoroughly and use the air bulb to blow any left over water out of the
tube and earmould.
i
NOTE:
Do not use alcohol or other cleaning solvents to clean the
metal hook as this could damage its protective covering.
Summary of Contents for Ambio
Page 1: ...User guide Behind The Ear hearing aids danalogic Ambio...
Page 58: ...58...
Page 59: ...59...
