6. Give the tailpiece
the right length
To avoid damaging the danalock you will have to
shorten the new cylinder tailpiece to max. 35 mm
from the door surface.
Use two pliers or a wire cutter to shorten the
tailpiece.
7. Attach the tailpiece adaptor
Choose the green tailpiece adaptor from the
Danalock
box and insert the tailpiece adaptor in
the center tube
on the backside of the
Danalock.
5. Mounting the
backplate on the door
Place the back plate
where the thumb turn used
to be on your door. The round hole in the middle
of the plate is for the tailpiece.
Use the 2 screws that originally held the thumb
turn to attach the back plate.
https://danalock.com/danalock-v3-scandi-guide.html
28.4.2017 9.41
Sivu 4 / 8