V3-BTZB
Danalock V3-BTZB, Technical Manual v.1.5, May 2017
Page 18
202-SMF018
Approvals and certificates
The V3-BTZB product is certified according to the following radio recommendations (EU,
US/Canada and Japan respectively):
The V3-BTZB is certified for electromechanically operated locks and striking plate’s
classification matrix (N/A is not applicable for V3-BTZB):
FCC and IC Statements
The V3-BTZB product contains radio transmitters that comply with CFR 47 Part 15.247 of
the FCC rules and with RSS-GEN, RSS-102 and RSS-247 of Industry Canada
requirements.
Notice statements according to CFR 47 Part 15.19 / RSS-GEN:
The V3-BTZB product complies with Part 15 of the FCC rules and with Industry Canada
license exempt standard(s). Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Déclarations selon le CFR 47 section 15.19 / RSS-GEN:
Le présent V3-BTZB appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le
fonctionnement.
FCC-ID: 2ADSH-V3BTZB
IC-ID: 12588A-V3BTZB
Battery: CR123A 3V
2.4 GHz, Pout < 10 mW
