danalock Danabridge V3, Manual, Page: 14 / 16

and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and
receiver.
— Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Australia and New Zealand
This product complies with the AS/NZS 4268 requirements
for Bluetooth LE transceiver (2402 MHz ~ 2480 MHz ) and
WiFi transceivers (IEEE 802.11b/g/n-HT20): 2412MHz ~
2472MHz.
The product complies with the requirements of the relevant
ACMA Standards made under the Radiocommunications
Act 1992 and the Telecommunications Act 1997, by
the Supplier’s Declaration of Conformity (SDOC). These
Standards are referenced in notices made under section
182 of the Radiocommunications Act and 407 of the
Telecommunications Act.
The product complies with the requirements of the relevant
standards under Section 134 (1) (g) of the New Zealand
Radiocommunications Act 1989, by the Supplier’s Declaration
of Conformity (SDOC)
Japan
The product is approved in Japan with the certificate ID n°:
[R] 204-820373
This device is granted pursuant to the Japanese Radio
Law ( 電波法 )
= 当該機器には電波法に基づく、技術基準適合証明等を受けた
特定無線設備を装着
している
This device should not be modified (otherwise the granted
designation number will become invalid)
本製品の改造は禁止されています。 （適合証明番号などが無
効となります。 )
Regulatory labeling:
The Danabridge V3 product are regulatory compliant
to the following regulation (Europe, USA/Canada, Japan,
Australia/NZ):
204-820373
REACH
COMPLIANT
RoHS
2011/65/EU
Amendment
2015/863/EU