danalock Danabridge V3, Manual, Page: 12 / 16

Simple Guidelines
Please follow these guidelines when configuring, using,
or recycling the DBV3. Violating these guidelines may be
dangerous, illegal, or otherwise detrimental. Further detailed
information is provided in this manual.
Terms of use
This equipment design is primarily for indoor use mounted
in a standard electrical outlet. Use only Danalock approved
accessories for the DBV3. Do not connect incompatible
products, and do not operate the DBV3 where wireless radio
communication is prohibited. Like hospitals, buildings near
blasting sites etc.
Do Not Operate Where Prohibited
Do not allow the DBV3 unit to operate wherever wireless
radio communication use is prohibited or when doing so may
cause interference or danger as the DBV3 cannot be turned
off after installation.
Device Operation and human exposure to electromagnetic
fields
The DBV3 unit is a low power radio transmitter and receiver.
Periodically the DBV3 wakes up either due to activity or
by a timer. When it is ON, it receives and sends out radio
frequency (RF) signals for a short period of time.
Specific Human Absorption Ratio (SAR)
The DBV3 unit is not intended for handheld use or to be
worn on the body. A minimum separation of eight (8”) inches
(20 cm) is to be maintained between the DBV3 and any
persons’ body.
Pacemakers and other Medical Devices
If any other personal medical devices are used in the vicinity
of a DBV3 unit, consult the manufacturers of the medical
devices to determine if they are adequately shielded from
external RF energy. Physicians may be able to assist in
obtaining this information.
Interference
Like all wireless devices, the DBV3 may encounter electrical
interference that may affect its performance. The DBV3 is
tested and certified according to international and European
standards. The performance hereof ensures correct
operation in the presence of electromagnetic interference
and/or electrostatic discharge.
Category of use
The DBV3 WiFi interface is an accessory to other Danalock
products and will only work together with these to access
the internet.
Security for electrical functions
The DBV3 has no indications, sound alarms in case of a
connected lock malfunction.
Security for electrical manipulation
The DBV3 is tested compliance to the EMC requirement laid
out in the 2014/53/EU directive. The performance hereof
ensures correct operation in the presence of electromagnetic
interference and/or electrostatic discharge.
Children
The DBV3 series and its accessories are not used to solicit
data from or market to children
CE mark
The DBV3 complies with the essential requirements of
the RED directive 2014/53/EU directive with respect to
the radio spectrum, EMC, Health and safety. EU Certificate
and Declaration of conformity (DOC) statements can be
downloaded from the homepage:
https://danalock.com/legal/certificates/
Product specifications
Supply Voltage Via USB 5V DC, 1A
Temperature
range
Active operating mode 0ºC to +40ºC
Storage 5ºC to +40ºC
Mechanical
specifications
Dimensions (D x H) 53 mm x 32 mm
Weight 36 g
Material Plastic White ABS
Radio
interfaces
WiFi Max 12 dBm
Bluetooth LE Max 4 dBm