To power up your
Danalock circle you
first have to remove
the top lid from the
housing base.
Use a small flat-
head screwdriver
to separate the lid
from the housing
base.
Be gentle when
removing the lid.
13. Remove the lid
The Danalock comes
with batteries inserted,
but a thin plastic folio
guarantees that your
new Danalock is fully
charged.
Remove the folio and
the Danalock lights up
with a green light for
5-10 seconds.
NOTE: This LED is
the ONLY light that
lights up, after the folio
has been removed.
14. Power up the lock
Click the lid
gently
back on.
17. Click the lid on
Fit the Danalock over
the back plate.
Make sure that the
tailpiece hits the slide
in the middle of the
adaptor.
15. Fit the tailpiece to the middle of the housing base
1,5 mm
Fasten the
Danalock to the
back plate by
tightening the two
umbraco screws
on each side of
the base with an
1,5 mm Allen key.
16. Fasten the Danalock
EURO version quickmount
page 3
Go to Google Play or App Store
and download the Danalock App.
When you have installed the app
you need to make a user profile
in the top green ring. You will use
this profile each time you log on
the app.
Next you need to press ”Menu”
in the top right corner, and the
press ”Add lock”.
A guide will now lead you
through the configuration
of your Danalock.
19. Download the Danalock App
You need to calibrate the Danalock
before you can use it.
After mounting turn the Danalock
until the the lock is unlocked. Leave
the door open, so the lock isn’t
influenced while calibrating.
18. Ready for calibrating
Note: If the batteries are
disconnected, you will have to
calibrate the Danalock again.
Use your smartphone to lock
or unlock by pressing the
lockicon on your Keychain in
the app.
You can also use the Auto
unlock feature to unlock your
door when you come home,
and have the Danalock to
automatically lock the door
behind you after a few
seconds.
20. Lock / unlock with your smartphone
